Pro Track Classic Series CNC Drag Front Wheels, 3/4 O-Ring - PRO411G
Pro Track Classic Series CNC Drag Front Wheels, 3/4 O-Ring
Pro Track Classic Series Drag Front Wheels are CNC Machined for accuracy. The wheels are approximately 3/4" in diameter and included are two sizes of O-Ring fronts giving you more options to achieve the desired look on your masterpiece race car.
The wheels without rubber are .675" in diameter, with the small (0.100") rubber the finished diameter is .788", with the larger (0.138") rubber the finished dimension is .878". A popular trick is to true the rubber O-Ring down to create a flat spot and more scale looking front wheel.
The width is .120" with an extended hub for a total width of .250 (1/4"). The Axle bore is 1/16" and can be fitted on piano wire or brass pin tubing for the axle.
The wheels are CNC Machined from aluminum and have a plain finish with some fine lines left from the machining process. They can further be polished by hand or with a rotary tool for an ultra-smooth finish.
We also stock many sizes of rear wheel to match, also matching wheelie bar wheels are available.
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: